Registry Key

Data Type

Default Value

Description

ACG10S_DAP

REG_DWORD

20005

Specifies the ACG10S data access port number to which to connect.

ACG10S_IMR

REG_DWORD

20006

ACG10S_IP

REG_EXPAND_SZ

127.0.0.1

Specifies the ACG10S remote IP address to which to connect.

ACG10S_Mode

REG_EXPAND_SZ

BINARY

Specifies the communications mode (BINARY or ASCII)

DbgMsgON

REG_DWORD

1

Enables (1) or disables (0) the internal DM debug messages.

dbgON

REG_DWORD

0

Debug Flags for ASCII file debugging/diagnostic trace. 0 disables verbose logging while 255 enables the most verbose logging.

LogDays

REG_DWORD

0

Specifies the number of days of logged data to keep before overwriting the oldest files.

LogMode

REG_DWORD

0

Specifies the logging mode: (0=create a new log file per day, 1=create a new log file per hour, 2=create a new log file per 10 minutes)

max_poll_cycle

REG_DWORD

25000

Specifies the maximum time, in milliseconds, between device polls.

MaxDebugLines

REG_DWORD

100000

Defines the maximum number of debug/log output lines that can be written to the debug files.

MaxIO

REG_DWORD

8192

Limits the number of tags that the interface will support

PeriodForStats

REG_DWORD

1800000

Specifies the time interval, in milliseconds, at which the internal DM stat counters are written to the log file.

PollRate

REG_DWORD

500

Host device poll rate in milliseconds

ReConnectDelay

REG_DWORD

3000

In the event of a connection being lost, attempts to reconnect in intervals of no shorter than ReConnectDelay milliseconds.

SlotQualityEnabled

REG_DWORD

1

Enables (1) or disables (0) the monitoring of slot quality

ShowMsg

REG_DWORD

1

If enabled (1), causes the DM to write operational messages to the log files.

SledgeHammer

REG_DWORD

0

(1) applies the ACG10S sledgehammer option to the unit.