Configuring the Logger Module
The Logger requires minimal configuration in order to use on any existing IDX gateway.
Prior to using the logger, please ensure that adequate storage space is available for the required application. When the logger is logging at high-speed (millisecond intervals), log file size can grow quickly if large amounts of tag data need to be captured. In addition, depending on the speed of the hardware platform, particular the storage subsystems, it may not be possible to maintain a high logging speed.
Configuration using the IDX MMC Configuration Tool
· Start your IDX Configuration Tool located at Start -> IDXOnline -> IDX
· The configuration tool will automatically start displaying all defined groups and Servers which have been previously registered in the configuration tool.
· If creating a new IDX service, first connect to a machine by first creating a group and then connecting to a local or remote IDX server configuration database. Once the server has been added, the existing server services and their state will be displayed beneath the server. A new service can be added by right-clicking on the server name. Enter a unique service name and configure any service parameters to your requirements. When done, select the service name you just added on the server and select the DMs node.
· If you wish to add and a Logger Interface to an existing IDX service, which should be listed in the window if available, select the service you wish to add the Logger Interface to and select the DMs tab.
· Under the DMs tab, add a new DM. From the Type field selection tab, select the DM_LOGGER module if you wish to configure an Logger Interface. Perform the relevant DM interface configurations.
· Once the relevant DM has been added to the DM list, add any additional DM interfacing modules as required. This process can be repeated/revisited at any stage.
· Select the IDX Slots node:
o For new IDX services, no slots will have been defined. In this case, add and configure new slots as required. Slots can also be imported from a file using the Import DB Slots function. Note that slots are universally pooled in an IDX service, in other words, all service DM’s can interact with them. Double click on slots in the list to configure their properties.
o For existing IDX services, a number of slots may have already been added to the slots list. In this case, add additional slots if necessary or configure slot actions under the DM Actions node.
· For the Logger Interface, slot actions need to be configured for each slot to be read/interacted with. This is done under the DM Actions node.
· Under the Logger Interface DM Actions node, add a new action. Slots with actions already assigned will not appear in the slot drop-down list. Select a slot for which an action is to be defined and define the action type under the DM Action Type drop-down field tab. Slots can be defined as read, write or read-write. Apply the action to the slot using the OK button. Once an action has been added, certain DM-specific properties need to be defined for the slot. Once configured, the action is added to the slot.
· Once all slots have been configured with their respective actions (in the client case) and all required slots have been added, the new DM’s must be activated. Do this by selecting the added DM node, right-clicking and then selecting Load DM. Once loaded, the DM node image will change to a green arrow state. DM’s can be dynamically loaded/unloaded using this method.
· Once the required DM’s are activated, the IDX Service must be started, if not already running. Right-click on the respective Service node and then Start IDX Instance to start the service.
· Export the slot configuration by right clicking on the slots list node and selecting Export Slots.